Genset Welders

Performance characteristics 1. Using Dowitz TD226B-3D four-stroke three-cylinder engine, the power is surging. 2. Brushless, inductor power generation technology, high power generation efficiency, provide better welding power source. 3. Adopting high and low current selector switch does not need...
Product description

Performance characteristics

1. Using Dowitz TD226B-3D four-stroke three-cylinder engine, the power is surging.

2. Brushless, inductor power generation technology, high power generation efficiency, provide better welding power source.

3. Adopting high and low current selector switch does not need the tedious process of shutdown and plugging and pulling out fast plugs.

4. Equipped with oil alarm, water temperature alarm, battery alarm, oil alarm function.

5. Instruments are complete and equipped with sensor oil meter, digital ammeter, voltmeter, timer and electricity.

Flow adjusting knob, arc blowing adjusting knob, etc.

6. It can realize double-handed manual + double-handed semi-automatic output on the same machine, in the true sense of engine welding machine ranks.

To achieve the same machine output, manual welding and semi-automatic welding output effect at the same time to achieve a perfect realization, fully satisfied

Lincoln LN-23P and Bear Valley wire feeders can be optionally selected according to the requirements of professional construction units of long distance pipelines.

Flat characteristic welding output is carried out.

7. Suitable for many kinds of electrodes. Excellent application of cellulose electrodes, low hydrogen electrodes and all-position argon arc welding can be achieved.

Answer.

8. Excellent arc effect, stable arc, small splash, delicate and smooth feel.

9,2*3KW 220V+30KW three-phase auxiliary power supply can provide on-site power supply for various equipment and tools.

The fuel consumption of 10 and 400 A is only 4.96L/h. 79L tank can run continuously for more than 15 hours.

Oil tank cover is anti-theft type, which avoids frequent oil loss in construction site.

11. There are four anti-theft checking doors on the left and right sides of the whole machine, so that the maintenance and maintenance of the whole machine can not be separated from space and land.

Limitation of points; Hanging rings in the middle for easy lifting during transportation; Trailer installation reserved at the bottom

Hole. There are outlets of exhaust oil, drainage and fuel oil under the bottom side.

12. The whole machine adopts mute technology. The 3M noise is only 75dB, which greatly improves the construction of noise on site.


Engine

Model Mitsubishi S4S

Formal four-stroke four-cylinder water cooling

Exhaust capacity CC 3.331

Rated output KW 28

Rotating speed/minute 1500

Fuel Light Diesel

Start-up System Electric Start (12V)

Fuel tank capacity L 79

Shape size (length * width * height) mm 2000 * 900 * 1000

Net weight Kg 900

Noise dB 68 (7M)

Specification and data of HW600DS engine welding machine

Formal DC rectifier

Manual welding (descent characteristics)

Rated output KW 9.15*2

Rated current A 290*2

Rated voltage V 31.6

Current regulation range A 60-300

Applicable electrode mm 2.0-8.0

No-load voltage V 82

Rated usage% 60

Alternator

Rated output KVA 20

Rated voltage V (AC) 380

Rated current A 30

Phase number three-phase four-wire

Power factor% 80


Frequency Hz 50

Brushless Motivation

Direct Drive Coupling

Insulation Grade F

Protection Level IP23

Hot Tags: genset welders, China, suppliers, manufacturers, factory, OEM, customized, made in China
Related Products
Feedback

Copyright © Chongqing Kiatse Industry Company Ltd All Rights Reserved.Tel: +86-23-67094800